Acetone is the fast-evaporating solvent for cleaning polyurethane application equipment and thinning acetone-based adhesives, epoxies, and polyester resins.

Why this product exists

Adheseal Acetone is engineered as a high-performing solvent for both precise cleaning and effective thinning. Use it to efficiently remove polyurethane-based adhesives from tools and application equipment. It also serves as a versatile thinner for acetone-based PVC and polyurethane adhesives, epoxies, lacquers, and polyester resins, ensuring optimal workability and viscosity for your specific application. This VOC-exempt solvent dissolves many natural and synthetic gums, waxes, oils, and dyes, and mixes readily with water, alcohols, esters, ethers, and other organic solvents.

The numbers that matter

The properties of Adheseal Acetone are tailored for efficient solvent tasks:

  • Specific Gravity of 0.792: This low density aids in its fast evaporation, crucial for leaving clean surfaces without heavy residue.
  • VOC-Exempt (0 g/L): Complies with environmental regulations, making it a responsible choice for solvent applications.
  • Water-thin viscosity: Ensures effective thinning of adhesives, lacquers, and resins, promoting consistent application and improved flow.
  • Evaporation Rate (Slower than ether): While not instantaneous, its rapid drying time prevents prolonged surface wetness, reducing downtime.

Where this product excels

Adheseal Acetone proves effective across various trade-specific applications:

  • Auto Body and Marine Repairs: Thin polyester resins and epoxies for fibreglass boat and auto repairs, ensuring proper penetration and finish.
  • Glazing and Joinery: Clean application equipment contaminated with polyurethane or acetone-based PVC adhesives, preventing tool build-up and extending equipment life.
  • Thinner for Lacquers and Adhesives: Adjust the viscosity of various lacquers and adhesives for specific application needs.

Choose this when

  • When you need to thin epoxies, lacquers, adhesives, or polyester resins for improved workability.
  • When cleaning polyurethane or acetone-based PVC adhesive from application tools and equipment.
  • When you require a fast-evaporating solvent that is VOC-exempt and leaves minimal residue.

Don't use this when

  • Not for: Cleaning equipment used for polystyrene foam, as Acetone will aggressively attack and damage the material.
  • Not for: Use near open flames, sparks, or any ignition sources. Adheseal Acetone is an extremely flammable liquid and vapour.
  • Not for: Use in unventilated areas. Ensure adequate ventilation to prevent flammable vapour build-up and minimise inhalation risks.
  • Not for: Use without appropriate personal protective equipment (PPE), including chemical-resistant gloves and eye protection, to prevent skin irritation and serious eye damage.

Adheseal Acetone is classified as a Hazard Class III material, demanding careful handling due to its extremely flammable nature. It is VOC-Exempt (0 g/L), aligning with environmental standards. Always consult the Safety Data Sheet (SDS) for comprehensive health, safety, handling, and regulatory information, particularly concerning ventilation and ignition source control.