The EverKrete Concrete Repair System Trade Kit is a professional-grade solution for fast, high-performance concrete repairs. Powered by EverKrete 102 thermoset vinyl polymer, this system produces a durable mortar for horizontal, vertical, and overhead surfaces. With a cure time of just 45–90 minutes, it's ideal for industrial floors, commercial pathways, and civil infrastructure.

Primer Information: Use EverKrete Primer on all clean, dry, structurally sound surfaces. Brush or roll to create a thin, tacky bond layer before applying mortar. For cooler temperatures (below 10°C), substitute with a blend of EverKrete 102 and Accelerator for consistent adhesion.

Cure Time: Cures in 45–90 minutes depending on temperature and application thickness. Allows full return to traffic use within 1.5 hours—ideal for high-demand sites needing rapid turnaround.

Coverage Rate: A 4 L kit yields approximately 12 L of repair mortar, covering up to 12 m² at 1 mm thickness. Surface overlays vary from 2–4 m²/L depending on porosity and finish type.

Application Temperature Range: Apply between 10°C and 35°C (50°F to 95°F). Use Accelerator for sub-10°C applications or rapid cure needs.

Chemical Properties: Based on thermoset vinyl polymer, the cured product features >70 MPa compressive strength, low water absorption, and Shore D 79 hardness. Excellent bond to concrete, brick, and masonry.

Key Features of EverKrete Concrete Repair System Trade Kit

• Rapid cure—traffic ready in 45–90 minutes
• Supports horizontal, vertical, and overhead applications
• Non-shrink and high-strength (>70 MPa compressive)
• Customisable finish from feather edge to aggressive slip resistance

Why Choose EverKrete Concrete Repair System Trade Kit:

• Trade-friendly kit includes measuring tools, primer, and instructions
• Performs in extreme temperatures with optional accelerator
• Ideal for reactive site conditions and fast patch turnarounds
• Designed to bond with common Australian substrates

When to Choose EverKrete Concrete Repair System Trade Kit versus Alternatives:

• Choose EverKrete over epoxy fillers when: You need faster return to service and surface flexibility
• Consider other options when: Application temperatures fall below -18°C and heating is not feasible

Trade-Specific Applications for EverKrete Concrete Repair System Trade Kit:

Application Information

• Required Tools: Mixing paddle, measuring cups, stainless steel trowel, roller, acetone, cloth tape
• Trade-Specific Tips: Use acetone-wiped trowels for smooth finishes; heat surfaces in cool weather to speed primer cure
• Common Issues and Solutions: Use Accelerator below 10°C; always use kiln-dried sand to avoid moisture-related failure

Storage and Shelf Life

• Storage Requirements: Store in a cool, dry place between 10°C and 35°C
• Shelf Life Information: 12 months from production if unopened and properly stored
• Temperature Considerations: Avoid exposure to freezing or excessive heat in transit or storage

Certifications and Compliance

• ASTM D638 – Tensile Properties
• ASTM D790 – Flexural Strength
• ASTM D2240 – Shore Hardness
• ASTM D570 – Water Absorption