Mount acoustic foam in minutes — without wrecking your walls

You bought acoustic foam to fix echo, not to spend a Saturday hunting for spray adhesive that won't peel paint. The KK1207 kit gives you 24 pre-cut transparent tabs that grip the back of the foam, stick to the wall, and come off clean when you move out. No roll to measure. No knife. No yellow goo. Just peel, press, mount.

• 24 pre-cut tabs — no roll to measure or cut
• Formulated for foam — won't shred the panel on removal
• Wall-safe — comes off clean on paint, drywall, tile
• Transparent — no yellow residue, no visible edges
• Backed by Arrowzoom's 100-day guarantee

Why most "foam tape" fails

Generic mounting tape is built for posters and picture frames. Press it on acoustic foam and one of two things happens: it grips so hard it rips the foam in half when you reposition, or it gives up after a week and your panel slides down the wall at 2 a.m. The KK1207 adhesive sits in the middle on purpose — strong enough to hold a 2" foam panel indefinitely, soft enough to release the foam intact.

Specs

What's in the box

• 24 × KK1207 transparent acoustic-foam mounting tabs
• Each tab: 1.18" × 1.18" (3 × 3 cm)
• Quick-start install card

How many do you need? Use 2 tabs per 12" foam panel, 4 tabs per 24" panel, 6 tabs per bass trap. One pack of 24 mounts roughly 12 standard 12" panels or 6 large panels.

Install in 4 steps

1. Wipe the wall clean and dry. No dust, no grease.
2. Peel the first liner. Press the tab firmly onto the back of the foam panel.
3. Peel the second liner. Position the panel on the wall.
4. Press for 30 seconds with firm, even pressure. Done.

Made for

Why we're different from a roll of mounting tape

Technical reference — STC, NRC, and what tape actually does

Two acoustic numbers matter for room treatment:

• NRC (Noise Reduction Coefficient): how much sound a material absorbs. Premium 1–2" acoustic foam typically falls between NRC 0.70 and 0.95. Higher = better absorption of reflections, flutter echo, and room mode buildup.
• STC (Sound Transmission Class): how much sound a wall assembly blocks from one room to the next. STC is a property of the full wall (studs, drywall, insulation), not of individual products mounted to it.

Honest answer: mounting tape has no STC rating because tape is not a wall assembly. What the KK1207 does is keep your foam flush and stable on the surface so the foam's NRC actually works. Foam that falls off the wall absorbs nothing.

Frequently asked

Click any question to expand ↓