Colour-5 M 60 LED/M
Brand-TOPXCDZ
Indoor/Outdoor usage-Outdoor
Special feature-Waterproof
Wide compatibility: Can be controlled by Arduino, Raspberry Pi, Fadecandy, K1000C, SP105E, SP107E, SP110E, etc. 12V WS2812B LED Strip: WS2815 LED Strip is an upgraded version of 5V WS2812B LED strip. For 5m LED strip, even if all LEDs are turned on full white, the 12V version has no voltage drop. You don't need to inject power as frequently as 5V version. Individually addressable: Each pixel can have its own colour and brightness. You can control it individually and set it to any desired colour or animation. 256 brightness display and 24-bit colour display. Dual signal wires: WS2815 LED strip is similar to the version of 5V WS2813 LED strip, designed with a data cable and a backup data cable. Signal breakpoint continuous transmission. If an LED is damaged, the following LEDs can still work. Easy installation: Self-adhesive tape on the back for IP30/IP65, can be fixed on any dry and flat surface without screws and clips. Each LED can be cut off at the cutting line. Specifications: IC Type: WS2815 IC Grey level: 256. Viewing angle: 120°. Input Voltage: DC 12V Color: Full color, 24-bit FPCB Board Color: White/Black Power: 0.3W/LED 30/60/144LEDs/m Model: WS2815 Strip 5050RGB chips. Storage temperature: -30 to +95 °C. Operating temperature: -20 to +85 °C. LED Quantity: 30/60/144 RGB SMD 5050 per meter Distance between two LEDs: 30 LEDs/m - 28 mm, 60 LEDs/m - 12 mm, 144 LEDs/m - 1.92 mm. Wavelength (Nm): Red 650nm Green 520nm Blue 460nm Waterproof: IP30: not waterproof, IP65: waterproof in silicone coating, IP67: waterproof in silicone tube. Package includes: 1 x 1m/5m WS2815 RGB 30/60/144 LEDs/m LED strip (30 LEDs/60 LEDs are 5 m, 144 LEDs are 1 m, please note serving).
DC12V individually addressable. DC5V WS2812 upgrade, comes with backup data. Maximum white brightness, 16.4 feet, no voltage drops. Ultra bright. 256 grayscale, 24-bit full color display. Only support 12V power supply. Do not try DC5V DC24V power supply. Recommended power supply: DC12V3A (36W)
Dual signal Signal break point continuous transmission. If a pixel is damaged, the following LEDs will still work. .WS2815 IC built-in 5050SMD.256 brightness display and 24-bit colour display. An IC controls an LED. Each LED can be cut. Static effect, chasing effect, special effect, etc. 256 brightness display and 24-bit colour display
Intelligent reverse polarity protection, access to 5V power supply for product installation in case of reverse polarity, will not cause damage to the lamp beads.
Built-in signal shaping circuit, any pixel after receiving the signal through the waveform and then output to ensure that the line waveform distortion does not accumulate.
All electronic components are integrated into 5050 lamp beads, no other peripheral electronic auxiliary components are required to form a complete external control pixel. When reducing the product at the time of installation, reverse weld, caused by poor.