In an industry first, GodHand presents this new nipper that can cut wires of thinner diameter at the tip and thicker wires at the root! The cutting edge is different between its tip and root, to cut wires as finely as possible. Wires can be cut easily, without applying a lot of force to the nipper. Since the wire will be cut without being crushed, it can be inserted into holes drilled with the same diameter drill, and since it cuts flat, there will be less waste. Wires of a diameter from 2mm to 0.02mm can be easily and quickly cut for all your modeling needs! Each one is handmade to ensure quality.

• This nipper can safely cut the following types and diameters of wire:
• Brass wire: from 0.2mm (tip) to 2mm (root)
• Metal line: from 0.02mm to 0.042mm (tip)
• Copper wire: from 0.2mm (tip) to 2mm (root)
• Aluminum wire: from 0.2mm (tip) to 2mm (root
• Stainless steel wire (not baked): from 0.5mm or less (root) (Never cut stainless wire with the tip of the blade!)